266 lines
7.8 KiB
C
266 lines
7.8 KiB
C
/* USER CODE BEGIN Header */
|
||
#include <stdio.h>
|
||
#include "ladrc.h"
|
||
#include "usbd_cdc_if.h" // USB 虚拟串口发送头文件
|
||
#include "f4_can_app.h"
|
||
#include "usart.h"
|
||
/**
|
||
******************************************************************************
|
||
* @file : main.c
|
||
* @brief : Main program body
|
||
******************************************************************************
|
||
* @attention
|
||
*
|
||
* Copyright (c) 2026 STMicroelectronics.
|
||
* All rights reserved.
|
||
*
|
||
* This software is licensed under terms that can be found in the LICENSE file
|
||
* in the root directory of this software component.
|
||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||
*
|
||
******************************************************************************
|
||
*/
|
||
/* USER CODE END Header */
|
||
/* Includes ------------------------------------------------------------------*/
|
||
#include "main.h"
|
||
#include "can.h"
|
||
#include "tim.h"
|
||
#include "usart.h"
|
||
#include "usb_device.h"
|
||
#include "gpio.h"
|
||
|
||
/* Private includes ----------------------------------------------------------*/
|
||
/* USER CODE BEGIN Includes */
|
||
|
||
/* USER CODE END Includes */
|
||
|
||
/* Private typedef -----------------------------------------------------------*/
|
||
/* USER CODE BEGIN PTD */
|
||
|
||
/* USER CODE END PTD */
|
||
|
||
/* Private define ------------------------------------------------------------*/
|
||
/* USER CODE BEGIN PD */
|
||
|
||
/* USER CODE END PD */
|
||
|
||
/* Private macro -------------------------------------------------------------*/
|
||
/* USER CODE BEGIN PM */
|
||
|
||
/* USER CODE END PM */
|
||
|
||
/* Private variables ---------------------------------------------------------*/
|
||
|
||
/* USER CODE BEGIN PV */
|
||
/* USER CODE BEGIN PV */
|
||
CAN_RxHeaderTypeDef RxHeader;
|
||
uint8_t RxData[8];
|
||
volatile uint8_t can_rx_flag = 0; // 告诉主程序“有数据来了”的标志位
|
||
/* USER CODE END PV */
|
||
|
||
/* Private function prototypes -----------------------------------------------*/
|
||
void SystemClock_Config(void);
|
||
/* USER CODE BEGIN PFP */
|
||
|
||
/* USER CODE END PFP */
|
||
|
||
/* Private user code ---------------------------------------------------------*/
|
||
/* USER CODE BEGIN 0 */
|
||
extern USBD_HandleTypeDef hUsbDeviceFS; // 引入 USB 状态句柄
|
||
|
||
int _write(int file, char *ptr, int len) {
|
||
HAL_UART_Transmit(&huart4, (uint8_t*)ptr, len, HAL_MAX_DELAY);
|
||
return len;
|
||
}
|
||
/* USER CODE END 0 */
|
||
|
||
/**
|
||
* @brief The application entry point.
|
||
* @retval int
|
||
*/
|
||
int main(void)
|
||
{
|
||
|
||
/* USER CODE BEGIN 1 */
|
||
|
||
/* USER CODE END 1 */
|
||
|
||
/* MCU Configuration--------------------------------------------------------*/
|
||
|
||
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
|
||
HAL_Init();
|
||
|
||
/* USER CODE BEGIN Init */
|
||
|
||
/* USER CODE END Init */
|
||
|
||
/* Configure the system clock */
|
||
SystemClock_Config();
|
||
|
||
/* USER CODE BEGIN SysInit */
|
||
|
||
/* USER CODE END SysInit */
|
||
|
||
/* Initialize all configured peripherals */
|
||
MX_GPIO_Init();
|
||
MX_TIM1_Init();
|
||
MX_TIM2_Init();
|
||
MX_TIM3_Init();
|
||
MX_TIM4_Init();
|
||
MX_TIM5_Init();
|
||
MX_TIM8_Init();
|
||
MX_USB_DEVICE_Init();
|
||
MX_TIM9_Init();
|
||
MX_TIM6_Init();
|
||
MX_CAN1_Init();
|
||
MX_UART4_Init();
|
||
/* USER CODE BEGIN 2 */
|
||
// 1. 初始化 bxCAN 过滤器 (全通)
|
||
// 后面的 printf 就能看到了
|
||
CAN_FilterTypeDef canFilterConfig;
|
||
canFilterConfig.FilterBank = 0;
|
||
canFilterConfig.FilterMode = CAN_FILTERMODE_IDMASK;
|
||
canFilterConfig.FilterScale = CAN_FILTERSCALE_32BIT;
|
||
canFilterConfig.FilterIdHigh = 0x0000;
|
||
canFilterConfig.FilterIdLow = 0x0000;
|
||
canFilterConfig.FilterMaskIdHigh = 0x0000;
|
||
canFilterConfig.FilterMaskIdLow = 0x0000;
|
||
canFilterConfig.FilterFIFOAssignment = CAN_RX_FIFO0;
|
||
canFilterConfig.FilterActivation = ENABLE;
|
||
canFilterConfig.SlaveStartFilterBank = 14;
|
||
|
||
HAL_StatusTypeDef fs = HAL_CAN_ConfigFilter(&hcan1, &canFilterConfig);
|
||
HAL_StatusTypeDef ss = HAL_CAN_Start(&hcan1);
|
||
|
||
// 这句开启接收中断的函数极其重要，确认它还在！
|
||
HAL_StatusTypeDef ns = HAL_CAN_ActivateNotification(&hcan1, CAN_IT_RX_FIFO0_MSG_PENDING);
|
||
|
||
// 💡 修改这里：必须加这一句！给你的电脑 3 秒钟时间去识别 USB 虚拟串口
|
||
HAL_Delay(3000);
|
||
/* USER CODE END 2 */
|
||
|
||
/* Infinite loop */
|
||
/* USER CODE BEGIN WHILE */
|
||
|
||
while (1)
|
||
{
|
||
/* USER CODE END WHILE */
|
||
|
||
/* USER CODE BEGIN 3 */
|
||
// ==========================================
|
||
// 强制打印 1：每隔 1 秒无条件打印一次（心跳包）
|
||
// ==========================================
|
||
|
||
// ==========================================
|
||
// 强制打印 2：原来的 CAN 接收处理逻辑
|
||
// ==========================================
|
||
if (can_rx_flag == 1) {
|
||
can_rx_flag = 0; // 赶紧先把标志位清零
|
||
|
||
// 💡 修改这里：用一个数组把要发的话拼起来，只调用一次 printf！
|
||
// 这能彻底防止 168MHz 的 CPU 把 USB 虚拟串口瞬间撑爆死机
|
||
char usb_buf[100];
|
||
sprintf(usb_buf, "!!! BINGO !!! Got CAN MSG! ID:0x%03lX Data: %02X %02X %02X %02X %02X %02X %02X %02X\r\n",
|
||
RxHeader.StdId,
|
||
RxData[0], RxData[1], RxData[2], RxData[3],
|
||
RxData[4], RxData[5], RxData[6], RxData[7]);
|
||
|
||
printf("%s", usb_buf);
|
||
}
|
||
/* USER CODE END WHILE */
|
||
}
|
||
/* USER CODE END 3 */
|
||
}
|
||
|
||
/**
|
||
* @brief System Clock Configuration
|
||
* @retval None
|
||
*/
|
||
void SystemClock_Config(void)
|
||
{
|
||
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
|
||
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
|
||
|
||
/** Configure the main internal regulator output voltage
|
||
*/
|
||
__HAL_RCC_PWR_CLK_ENABLE();
|
||
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
|
||
|
||
/** Initializes the RCC Oscillators according to the specified parameters
|
||
* in the RCC_OscInitTypeDef structure.
|
||
*/
|
||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
|
||
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
|
||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
||
RCC_OscInitStruct.PLL.PLLM = 4;
|
||
RCC_OscInitStruct.PLL.PLLN = 168;
|
||
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
|
||
RCC_OscInitStruct.PLL.PLLQ = 7;
|
||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
|
||
{
|
||
Error_Handler();
|
||
}
|
||
|
||
/** Initializes the CPU, AHB and APB buses clocks
|
||
*/
|
||
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|
||
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
|
||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
||
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
||
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
|
||
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
|
||
|
||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5) != HAL_OK)
|
||
{
|
||
Error_Handler();
|
||
}
|
||
}
|
||
|
||
/* USER CODE BEGIN 4 */
|
||
void HAL_CAN_RxFifo0MsgPendingCallback(CAN_HandleTypeDef *hcan)
|
||
{
|
||
if (hcan->Instance == CAN1) {
|
||
// 翻转 LED 看看有没有进中断
|
||
HAL_GPIO_TogglePin(GPIOB, GPIO_PIN_2);
|
||
|
||
if (HAL_CAN_GetRxMessage(hcan, CAN_RX_FIFO0, &RxHeader, RxData) == HAL_OK) {
|
||
can_rx_flag = 1;
|
||
// 再翻转一次，确认消息取出成功
|
||
HAL_GPIO_TogglePin(GPIOB, GPIO_PIN_2);
|
||
}
|
||
}
|
||
}
|
||
/* USER CODE END 4 */
|
||
|
||
/**
|
||
* @brief This function is executed in case of error occurrence.
|
||
* @retval None
|
||
*/
|
||
void Error_Handler(void)
|
||
{
|
||
/* USER CODE BEGIN Error_Handler_Debug */
|
||
/* User can add his own implementation to report the HAL error return state */
|
||
__disable_irq();
|
||
while (1)
|
||
{
|
||
}
|
||
/* USER CODE END Error_Handler_Debug */
|
||
}
|
||
#ifdef USE_FULL_ASSERT
|
||
/**
|
||
* @brief Reports the name of the source file and the source line number
|
||
* where the assert_param error has occurred.
|
||
* @param file: pointer to the source file name
|
||
* @param line: assert_param error line source number
|
||
* @retval None
|
||
*/
|
||
void assert_failed(uint8_t *file, uint32_t line)
|
||
{
|
||
/* USER CODE BEGIN 6 */
|
||
/* User can add his own implementation to report the file name and line number,
|
||
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
|
||
/* USER CODE END 6 */
|
||
}
|
||
#endif /* USE_FULL_ASSERT */
|